33
How to Use - Incubator Temperature Indication
1-30 Displaying the Temperature of Each Incubation Chamber
When in the normal mode, this equipment indicates the temperature of only incubation chamber
1.
To check the temperature of another incubation chamber, press and hold SILENCE and
SET at the same time for about 2 seconds.
is shown on the temperature indication area. (The leftmost digit designates the channel
number.)
Press UP or DOWN to select a target channel. Then, the current temperature of the
corresponding incubation chamber is shown.
To return to the normal display, press SILENCE.
To Next Page
Loading...
