ASTEC CCM-iBIS User Manual

Innovative Blastocyst Incubator System
CCM-iBIS
Instruction Manual
Caution
Before using this product, be sure to read this instruction
manual carefully in order to use it properly.
After reading the manual, keep in an appropriate place which is
easily accessible to operators.
Please note that loss of substances caused by malfunction of
the product will not be compensated by ASTEC.

ASTEC CCM-iBIS Specifications

General

Brand	ASTEC
Model	CCM-iBIS
Category	Accessories
Language	English

Summary

Safety and Precautions

General Safety Guidelines and Pictograms

Essential safety rules, pictograms, and warnings for proper product use.

Installation, Electrical, and Environmental Safety

Warnings for electrical safety, grounding, environmental hazards, and power.

Operational Safety and Handling Precautions

Precautions for cables, wet conditions, substances, and equipment handling.

Maintenance, Service Life, and Product Handling Safety

Safety advice on maintenance, product service life, and careful handling.

Product Caution Labels and Warnings

Explanations of caution labels attached to the product for user awareness.

Product Overview, Installation, and Basic Setup

Product Features and Components

Overview of the product's features and identification of parts and accessories.

Installation Location and Procedures

Requirements for a safe installation location and connection steps.

Cleaning, Dish Setting, and Incubator Configuration

Cleaning, dish placement, and initial settings for temperature, CO2, and O2.

Advanced Settings and Fine Adjustment

Fine Adjustment Mode Overview and Controls

Accessing and using the fine-adjustment mode for sensors and parameters.

Temperature, CO2, and O2 Parameter Tuning

Adjusting PID parameters, offsets, alarms, and delay times for gases.

Flow Rate, Fan, Software, and Version Settings

Fine-tuning flow rate, fan settings, software installation, and version display.

PC Operations and Workflow

PC Software: Start, Login, and Main Interface

Initializing the PC software, logging in, and navigating the main screen.

Cultivation Workflow: Dish-In to Live Display

Procedures for Dish-In, Preview, Live Display, and Capture for cultivation.

Data Management: Dish-Out, File Handling, and Reporting

Dish-Out, file transfer/deletion, image check, and report generation.

System Configuration, Monitoring, and User Management

User settings, logs, system configuration, schedules, and Z-slice settings.

Specifications and External Interfaces

Technical Specifications and Dimensions

Detailed technical data including dimensions, power, and performance metrics.

External Output Signals and Connections

Information on alarm contact and analog voltage outputs for external devices.