When handling harmful substances such as toxic, pathogenetic, or radioactive materials,
use the product in a determined remote institution. Mishandling may have adverse
physical effects or harm the natural environment. When asking about maintenance or
repair work, issue a safety verification document, so that the safety of repair personnel
will be ensured.
Before starting cleaning, maintenance work, or inspection, turn off the power and then
disconnect the power cable plug; or turn off the power source. If not followed, electric
shock or personal injury may result.
The product must not be repaired or modified by persons other than certified technicians.
Problems such as fire or malfunction may cause personal injury.
When a problem occurs, turn off the power and disconnect the power cable plug; or turn
off the power source. If the product is kept running with a problem remaining unsolved,
electric shock or fire may result.
The product must be used only with the rated frequency and voltage indicated on the
rating label attached to the main body. Fire or electric shock may result. If the product is
kept running after occurrence of a problem such as generation of smoke or unusual odor,
fire or electric shock may result. Turn off the power switch, and be sure to remove the
power cable from the outlet. Then, contact your dealer or ASTEC.
The service life of this product is seven years after purchase. If the product is used
beyond this period, the safety of the product will not be assured due to factors such as
possible frequent malfunctions, and an accident may be induced. Note that on the
product whose service life elapsed, preventive maintenance does not allow the product to
keep its original performance.
Do not use the product under ambient conditions outside the specified ranges of
temperature and humidity. The original performance of the product cannot be kept, or
malfunction can occur.
Do not place heavy objects or a containers with water on the product. Falling of such
object can cause a personal injury. Also, spilling of water can spoil the insulation of the
electric components, resulting in power leakage and short circuit.
Do not step on the product or place any object on the product. Personal injury may result
due to toppling, damage, or falling.
Do not directly expose the product to water. Electric shock, short circuit, or fire may result.
To Next Page
Loading...
Need help?
General
