The product must be installed by your dealer or a certified company. If installed by the
customer, any inappropriate work may result in gas leakage, electric shock, or fire.
The product must be installed horizontally on a floor with sufficient strength for the weight
of the product. Moreover, a measure for preventing the product from toppling must be
taken. If the strength of the installation floor is insufficient or the installation is performed
improperly, toppling of the product may result in a personal injury.
The product must be installed horizontally on a sturdy, level floor, and a measure for
preventing the product from toppling must be taken. If the installation is performed
improperly, toppling or falling of the product may result in a personal injury or other
damages.
The product must not be installed in a humid place or place that can be exposed to water.
Deterioration of the insulation may cause short circuit or electric shock.
The product must not be installed in a place where flammable or volatile substances are
present. Explosion or fire may occur. The product must not be installed in a place where
corrosive gas such as acid is present. Corrosion of the electric components induces
deterioration of the insulation and causes short circuit or electric shock.
To prevent electric shock, use an earth-fitted outlet. If no earth-fitted outlets are available
and grounding is not possible, ask a certified company to perform grounding work.
The grounding wire must not be connected to gas pipes, water pipes, lightning conductor
rods, or the grounding wires for phones. Inappropriate grounding may cause electric
shock.
Connecting the grounding cable to a gas pipe is very dangerous. Be sure that such
connections are never made.
The product must be used only with the rated frequency and voltage indicated on the
rating label attached to the main body. Fire or electric shock may result.
Use the dedicated power supply (alone) that meets the values on the rating label of the
product. If the power supply is shared with other equipment, parts such as the branch
socket may heat excessively, resulting in fire.
Use a power supply with the rated voltage for this product. If an inappropriate power
supply is used, problems such as malfunction of the product or damage to electrical
components can occur, resulting in a personal injury or fire.
Connecting the power cable to a branch socket (overloaded socket) can cause an
accident such as heat generation or fire and is dangerous. Be sure not to make such
connections. Also, even when using an independent outlet, check the power
consumption.
Use the product with a commercial power source (proper voltage). If an inappropriate
power supply is used, problems such as malfunction of the product or damage to
electrical components can occur, resulting in a personal injury or fire.
To Next Page
Loading...
Need help?
General
