Ch. 4. Tutorial: AC Mode in Air, Std. Scanner Sec. 4.3. Engaging the Surface
(a) Cantilever Zoom. See Step 10 on page 29. (b) Laser Spot ON. See Step 11 on page 30.
(c) Spot On by right clicking. See Step 11 on
page 30.
(d) Laser spot on the lever. See Step 12 on page 30.
Figure 4.2.: Various methods for aligning the laser spot onto the cantilever.
support.asylumresearch.com Page 35
To Next Page
Loading...