Asylum Research cypher - Page 97

Ch. 8. Conductive AFM (ORCA) Sec. 8.1. Parts list
Itm Part # Item Description Qty Picture
1
901.730
901.708
ORCA Holder 2nA/V
Dual Gain ORCA 1uA/1nA/V
For other available versions see
8.2.
1
2
ASTELEC-
01
10 pack of conductive levers.
Used for the measurements
described in this section.
1
3 823.009
HOPG sample. Used as a
conductive AFM test sample.
See Section 8.3.2 on page 98.
1
4 448.079
Sample bias wire assembly.
Connects sample to voltage
source on top of the scanner. See
Step 1 on page 98.
6
5 208.05
Samarium Cobalt Magnet, 0.07”
D X 0.104” L. Used to connect
the bias wire to the sample. See
Section 8.3.2 on page 98.
6
6 290.160
Leitsilber Conductive Paint, 0.5
Oz. Used to conductively glue
the sample to an AFM disc. See
Section 8.3.2 on page 98.
1
DRAFT
Page 93