Chapter 4 – Functions of the instrument
UM-22100H-U User manual ATEQ D520 Page 55/122
2. CONFIGURATION MENU
2.1. EXTENDED MENUS
The extended menus give access to additional functions. If these functions are
activated, they can be found under the FUNCTIONS menu when a program is created.
If no additional function is activated, the FUNCTIONS menu is empty when a new
program is created.
2.1.1. Activation of the additional functions
In the main menu, place the
cursor in front of the
CONFIGURATION label.
CYCLE SPE: Disabled
CONFIGURATION
SERVICE
Confirm using the ENTER
key.
EXTENDED MENUS
BARGRAPH : Yes
OUTPUTS CONF.
Next, confirm the EXTENDED
MENUS function with the
ENTER key. The list of
additional functions is
displayed.
NAME : No
CYCLING : No
AUTO CONNECT :No
To activate a function (e.g. the
NAME function), validate it
with the ENTER key. Next,
choose YES with the
navigation keys then confirm
again with the ENTER key.
Restart the operation if
necessary to activate other
functions.
NAME : Yes
CYCLING : No
AUTO CONNECT :No
Once all the chosen functions
have been activated, press
twice on the CANCEL key to
return to the main menu.
C
C
SPE CYCLE: Disabled
CONFIGURATION
RESULTS
To Next Page
Loading...
