Chapter 5 - Accessories
UM-22100H-U User manual ATEQ D520 Page 106/122
2.6. REMOTE FRONT PANEL RC5
2.6.1. Presentation
This option allows the placing of the control station in a different place than the control
instrument; it allows the remote control and reading of results. This is useful when the
measurement instruments have to be positioned in inaccessible locations, such as
inside a machine to reduce the lengths of piping between the instrument and the test
part
This front panel acts exactly as if the operator was in front of the instrument itself. For
the interface, refer to the global operation of the instrument.
This remote control is optional. It is connected to the LUMBERG type connector
reserved for remote controls. It is of "plug and play" type, the instrument automatically
detects it, and the “REMOTE CONTROL" menus appear if the RC5 remote control is
connected.
When the remote control is installed, its keyboard obtains priority over the control
instrument’s keyboard which becomes inactive.
To Next Page
Loading...
