Chapter 4 – Functions of the instrument
UM-22100H-U User manual ATEQ D520 Page 72/122
2.2. AUTOMATIC SAVE
This function has for main objective to save the test parameters from the RAM memory
of the instrument to its flash memory.
When this function is not validated, each time the key switch is turned from the
ACCESS to the LOCKED mode, the instrument displays NO PARAMETERS SAVED
IN FLASH. The save operation can be carried out manually in the
SERVICE PARAMETERS menu.
When the AUTOMATIC SAVE function is confirmed with a YES, the parameters are
saves automatically when the key is turned from the ACCESS to the LOCKED position.
This function is useful if the parameters in the RAM are accidentally erased. The
instrument will then automatically read and restore the flash parameters in the RAM.
To Next Page
Loading...
