FlexiROC T30 R 6 Daily Maintenance
106 No: 2969809547.1.2969824267 en-US
WARNING
High-Pressure Cleaning
High-Pressure Cleaning using compressed air, water jets, or steam jets can cause per-
sonal injury.
u Make sure that appropriate protective clothing is worn to protect eyes and exposed
parts of the body.
u Maximum air pressure at the nozzle must be less than 205 kPa (30 psi) for cleaning
purposes.
6.3 Visual Check
Read first: Safety Precautions Before Performing Daily Maintenance [}105]
DANGER
Side Hatches
There is a risk of personal injury due to the side hatches not being dimensioned for ex-
tra weight.
u Do not stand, sit, or lean on the side hatches.
u Close the side hatches when work is carried out on top of the machine.
Before each shift starts, an extra and thorough visual safety check must be performed to
detect:
n Damage that could lead to structural weakness or cracks
n Wear that could have the same consequences
n Cracks of fractures in materials or welded joints
If the drill rig has been subjected to abnormally high stresses, vital load-bearing compo-
nents must have been damaged. From a safety viewpoint, it is therefore especially impor-
tant to check the following points (see illustration: Check points).
To Next Page
Loading...
Need help?
General
