EasyManua.ls Logo

Atlas Copco FlexiROC T30 R - Winch Operation Safety Precautions; Winch Tramming Usage

Atlas Copco FlexiROC T30 R
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FlexiROC T30 R 4 Operation
69 No: 2969809547.1.2969824267 en-US
4.2.8 Safety Precautions Before Using Winch
WARNING
Risk of Moving Parts
Can cause serious personal injury and damage to property.
u Ensure that unauthorized personnel are outside of the working area.
u Never use the winch with less than four turns remaining on the winch drum
WARNING
Risk of Cable Failure
Can cause serious personal injury and damage to property.
u The anchorage point must be firm and secure (pay attention to local regulations)
u The safety hook must not be able to slide or detach from its attachment point
u A damaged cable or hook must not be used. See the chapter, Wire Ropes, in the main-
tenance instruction.
u Check that the winch locking mechanism is fully engaged in the drum before use, fol-
lowing the attachment of the cable eye on the anchorage point
WARNING
Accidental Operation
Accidental operation can cause serious injury or damage property.
u The operator must have a clear line of sight when working with a remotely operated
machine.
u Before operating the machine, always check that the controls are correctly adjusted.
u Always deactivate the remote control when not in use.
u Never stand on the machine during operation.
4.2.9 Winch Tramming
The winch can be used as an extra safety feature. To provide extra thrust when tramming
up or down a slippery slope, or as an extra brake when tramming down an incline.
!
NOTE: The winch must not be used for any other purpose.
!
NOTE: The winch can only be operated from the remote control box.
Action before winching
n The cable and eye must always be inspected before use.

Table of Contents

Other manuals for Atlas Copco FlexiROC T30 R

Related product manuals