EasyManua.ls Logo

Atlas Copco FlexiROC T30 R - Performance; Inclination Angle

Atlas Copco FlexiROC T30 R
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FlexiROC T30 R 7 Technical Data
127 No: 2969809547.1.2969824267 en-US
7.7 Performance
Description Data
Diesel engine, Cummins QSB
4.5 Tier 4 Final
Power output at 2000 rpm 116 KW
Temperature range in operation -25 ºC to +50 ºC (-13 °F to +122
°F)
Tramming speed, max. 1.1/3.1 km/h (0.68/1.93 mph)
Tractive force 97/50 kN
Ground pressure, average 0,15 N/mm2
Ground clearance 340 mm (13.4 ln)
Max. hydraulic pressure 230 bar (3336 PSI)
Track oscillation ±15°
Noise level Idling (800 rpm) 97 dB(A)
Full engine speed (2000 rpm) 106 dB(A)
Drilling (2000 rpm) 124 dB(A)
LWA (guaranteed value in accor-
dance with 2000/14/EC)
129 dB(A)
7.8 Inclination Angle
!
NOTE: Stability is specified regarding CE standards. CE standards stipulate that a
winch must be used when a machine is operating on an inclination steeper than 20 de-
grees.
FlexiROC T30 R -01 Data
Inclination angles - tramming Downward or upward, maximum
without winch
20º/19º
Downward or upward, maximum
with winch
30º/30º
Laterally, maximum 20º/20º
Inclination angles for drill rig
when drilling:
Longitudinally, maximum (up-
ward or downward)
10º/11º
Lateral (left or right) 7º/7º
!
NOTE: Stability is specified regarding CE standards. CE standards stipulate that a
winch must be used when a machine is operating on an inclination steeper than 20 de-
grees.

Table of Contents

Other manuals for Atlas Copco FlexiROC T30 R

Related product manuals