FlexiROC T30 R 4 Operation
58 No: 2969809547.1.2969824267 en-US
4.1.4 Starting Diesel Engine
!
NOTE: Monitor pressure gauges and display for diesel engine when in operation.
1.
Activate the remote control.
2.
Start the diesel engine by pressing the touch button
.
!
NOTE: If the rig has a cold starting kit: During cold starting the hy-
draulic pumps are unloaded when the engine is started. When the
engine speed has reached 1200 rpm the hydraulic pumps are en-
gaged. The time with the pumps disengaged is set on the operator
panel under the Settings menu.
3.
Check the hydraulic oil temperature (must be preheated to at least 20 °C (68 °F)).
!
NOTE: If any of the error indicator lamps comes on (on the diesel
panel), switch the engine off and then rectify the fault according to
the operator panel Diagnostic menu.
4.1.5 Warming up System
When working in a cold climate, it is important to:
n Use the preheating function
n Use ISO VG 32 hydraulic oil
The following functions prevent and stop the preheating function:
n Drilling
n Rotation
n Tramming
4.1.6 Particle Filter Regeneration
WARNING
Very High Exhaust Temperatures
Can cause serious personal injury and damage to property.
u Do not touch the particle filter.
u Park the machine in the open air during regeneration.
u Never cover the particle filter.
u Never let flammable materials come in contact with the particle filter.
Regeneration cleanses the particle filter of the exhaust system. In normal conditions, re-
generation starts automatically and does not affect the performance of the machine.
To Next Page
Loading...
Need help?
General
