FlexiROC T30 R 4 Operation
61 No: 2969809547.1.2969824267 en-US
!
NOTE: If the main power switch is turned off too early, then there is
a risk that the saved engine parameters are lost.
4.2 Tramming/Driving
4.2.1 Safety Precautions Before Tramming
WARNING
Tipping Risk
The tipping over of a machine can cause serious injury or death.
u Keep the feeder in tramming position and the boom inside the limits of the crawler
tracks.
u Keep the track oscillation cylinders locked.
u Never exceed the maximum allowed inclination angles for the machine.
u Never combine inclination angles for downward/upward/lateral tramming.
u Note the value of the gradient meter.
u Never operate the machine from the down side.
u Ensure that unauthorized personnel are outside of the working area.
u Always check the ground conditions where the machine is operated.
To Next Page
Loading...
