Atlas Copco FlexiROC T30 R - Right-Hand Lever Proportional Functions

FlexiROC T30 R 3 Controls and Instrument
35 No: 2969809547.1.2969824267 en-US
Sector Activity
K High percussion. Break loose with deactivated au-
tomatic drilling.
Stop flushing air
L Proportional rotation speed. Only manual percus-
sion.
M Proportional feed pressure. Proportional rotation
speed. Only manual percussion.
Functions during collaring
Sector Activity
J Deactivates drilling (low percussion, rotation, and
low feed). Does not deactivate flushing air.
K Activates full drilling (high percussion, rotation,
flushing air and high feed)
Functions during full drilling
Sector Activity
J Activates collaring (low percussion, rotation, flush-
ing air and low feed)
K Deactivates drilling (percussion, rotation, and
feed). Does not deactivate flushing air.
3.5.4 Right-Hand Multifunction Lever-Proportional Function
X Rotation
Y Feed
n Sector L and M have a proportional function for rotation and feed.
n Move the lever to F via sector D and E for full auto-drilling.
n Move the lever to F via sector D, E, and J for collaring.
n Move the lever via sector L, M, and J for proportional rotation and feed during collar-
ing.
n Sector F locks self-holding in collaring mode. Set values for rotation, low feed, and low
percussion are locked.