Atlas Copco FlexiROC T30 R

FlexiROC T30 R 6 Daily Maintenance
112 No: 2969809547.1.2969824267 en-US
6.11 Check Hydraulic Oil Filter
1.
Check to see if the needle on the pressure gauge Pressure in the return oil filter (B)
is in the red zone. If so, the filter must be changed. Contact Atlas Copco.
!
NOTE: The pressure gauge (B) Pressure in the return oil filter is
only reliable when the oil has reached a temperature of at least 40
°C (104 °F)
6.12 Check Track Frames
n
Check for signs of leakage on the traction motor (A).