FlexiROC T30 R 4 Operation
62 No: 2969809547.1.2969824267 en-US
WARNING
Accidental Operation
Accidental operation can cause serious injury or damage property.
u The operator must have a clear line of sight when working with a remotely operated
machine.
u Before operating the machine, always check that the controls are correctly adjusted.
u Always deactivate the remote control when not in use.
u Never stand on the machine during operation.
WARNING
High Voltage
High-voltage cables can cause serious injury and damage to property.
u Keep away from high-voltage cables.
CAUTION
Increased Risk of Sliding
Worn track shoes reduce the friction with the ground considerably and increase the risk
of sliding
u Always follow the maintenance recommendation for wear of track shoes.
NOTICE
Damage to Boom, Feeder, and Frame
Tramming with the feeder in upright position may cause serious damage to the ma-
chine's boom, feeder and frame.
u Tramming with the feeder in upright position must only take place when you drive the
machine short distances between boreholes over flat, level ground, otherwise the
feeder must be positioned on the feeder support.
4.2.2 Preparations Before Tramming
1.
Perform a walk-around inspection of the machine.
2.
Start the diesel engine.
3.
Set the boom and feed to the correct position for tramming.
To Next Page
Loading...
Need help?
General
