Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 3 Controls and Instrument
43 No: 2969809547.1.2969824267 en-US
The menu for winch force adjustment appears when the switch is in the tramming position,
with the touch button for Winch activated. Adjust winch force using the multifunction knob.
3.5.14 Feed Pressure Menu
Once forward feed is activated, the feed pressure can be adjusted with the multifunction
knob. Hold in the multifunction knob and turn it to set the correct value. This image is dis-
played when changing. Functionality must have been activated previously in Settings
(RRCFP).
3.5.15 Menus for Testing
The menus for testing are as follows:
n The menus for testing are accessed by holding the water mist button
and the On
button
pressed when the remote control is started.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English