FlexiROC T30 R 1 Introduction
7 No: 2969809547.1.2969824267 en-US
1 Introduction
1.1 Safety First
Always read the information in the Safety manual before starting to use the machine or
starting maintenance work.
1.2 The Purpose of this Publication
The Operation manual is intended to:
n Give an overall description of methods, required calculations, and settings
n Give an overall description of machine features
n Instruct the operator in applicable controls, handling, and operation
n Instruct the operator in operator maintenance and troubleshooting
1.3 Target Group
The information in this publication is intended for everyone involved in the application, op-
eration, and maintenance of the machine and related equipment. All readers are expected
to possess basic competence regarding mining methods, construction methods, and the
machines used for that kind of operation.
1.4 Feedback and Contact Information
Atlas Copco works actively with the development and continuous improvement of its prod-
ucts and associated documentation. Provide your feedback on products and documenta-
tion and access your local supplier under "Contact Us" at www.atlascopco.com.
To Next Page
Loading...
Need help?
General
