Atlas Copco FlexiROC T30 R

FlexiROC T30 R 8 Options
135 No: 2969809547.1.2969824267 en-US
6.
Adjust the feeder to the correct angle.
7.
Start drilling.
8.4.5 Aiming Examples
Two different ways of aiming ROC-ANGIE are described here. In the first example, the
aiming point is in line with the blasting direction.
a Bench
b Reference Point
In the second example, the aiming point is parallel with the bench. Deciding which method
to use depends on the nature of the terrain and the distance to the aiming point.