FlexiROC T30 R 4 Operation
57 No: 2969809547.1.2969824267 en-US
2.
Push the reset-button (H).
3.
Activate the remote control with touch button
.
4.
Turn the mode switch (B) on the remote control to position (3)
tramming.
5.
Check that active drill stop (F) is not activated.
6.
Establish radio communication by pressing touch button
until the communication
light symbol
is visible on the remote control.
è
All signal and indicator lamps comes on for around 3 seconds (lamp test). Lamp
indicating radio communication is green.
To Next Page
Loading...
