Atlas Copco FlexiROC T30 R - Page 46

FlexiROC T30 R 3 Controls and Instrument
46 No: 2969809547.1.2969824267 en-US
Lever Fault
n The message is shown during engagement if the levers are not in start position.
l Release the levers for the message to disappear.
n The message is shown in the event of a lever fault. Communication is disconnected.
l Restart the remote control in test mode and check the levers.
Low Battery
n The message is shown in the event of low battery level.
l Replace the battery.