Atlas Copco FlexiROC T30 R - Page 48

FlexiROC T30 R 3 Controls and Instrument
48 No: 2969809547.1.2969824267 en-US
n The message is shown in the event of a fault in the button.
l Go to test mode to check the buttons.
Inclination Error
n The message is shown in the event of unpermitted inclination of the remote control.
The remote control loses control and shuts down the current function.
l Set the remote control correctly. The message disappears and control of the
remote control is restored.
Internal Fault
n The message is shown in the event of a fault in the remote control.