FlexiROC T30 R 3 Controls and Instrument
50 No: 2969809547.1.2969824267 en-US
Stop Drilling/Rotation Function in Adjustment Mode
When adjusting the angle of the feeder with the mode switch (B) in position drilling (2), the
mode switch must be changed to position positioning (1). With continued drilling with the
mode switch in position positioning, the left multi-function lever (A) and the right multi-func-
tion lever (E) deactivates after 5 seconds of inactivity. The function stop drilling/rotation
works regardless of the mode selection of the mode switch.
To Next Page
Loading...
