Atlas Copco FlexiROC T30 R - Page 66

FlexiROC T30 R 4 Operation
66 No: 2969809547.1.2969824267 en-US
2.
Position the feeder against the feed support (T) with multi-function levers (A) and (E).
3.
Raise the hydraulic jack. Switch (K), position (1).
4.
Open the track oscillation lock with touch button
5.
Select tramming speed depending on terrain characteristics. Touch button
.
!
NOTE: Low tramming speed gives the highest traction and con-
versely.
6.
Operate the tramming levers (C) to move the drill rig in the desired direction.
7.
Use the contact breakers for track oscillation (G) to position the rig as horizontal as
possible.
8.
Use the boom system to optimize the stability of the drill rig.