Version 5.2 149 September 2007
SIP User's Manual 5. Web-based Management
5.5.9.2 Configuring the Voice Mail (VM) Parameters
The 'Voice Mail' screen is used to configure the Voice Mail (VM) parameters. The VM
application applies only to FXO/CAS gateways. For detailed information on VM, refer to the
CPE Configuration Guide for Voice Mail User's Manual.
¾ To configure the VM parameters, take these 4 steps:
1. Open the 'Voice Mail' screen (Protocol Management menu > Advanced
Applications submenu > Voice Mail option).
2. Configure the Voice Mail parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to 'Saving Configuration' on page 256.
To Next Page
Loading...