AudioCodes Mediant 2000 System - Configuring the RTP; RTCP Settings

To Next Page

To Previous Page

SIP User's Manual 172 Document #: LTRT-68806

Mediant 2000 & TP-1610 & TP-260/UNI

5.7.3 Configuring the RTP / RTCP Settings

The 'RTP / RTCP Settings' screen is used for configuring RTP/RTCP parameters.

¾ To configure the RTP / RTCP Settings parameters, take these 4

steps:

1. Open the 'RTP / RTCP Settings' screen (Advanced Configuration menu > Media

Settings > RTP / RTCP Settings option).

2. Configure the RTP / RTCP Settings according to the table below.

3. Click the Submit button to save your changes.

4. To save the changes to flash memory, refer to 'Saving Configuration' on page 256.