AudioCodes Mediant 2000 System - Configuring the Application Settings; Figure 5-29: Application Settings Screen

Version 5.2 157 September 2007
SIP User's Manual 5. Web-based Management
5.6.2 Configuring the Application Settings
The 'Application Settings' screen is used for configuring various application parameters
(e.g., for Telnet).
¾ To configure the Application Settings parameters, take these 4
steps:
1. Open the 'Application Settings' screen (Advanced Configuration menu > Network
Settings > Application Settings option).
Figure 5-29: Application Settings Screen
2. Configure the Application Settings according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to 'Saving Configuration' on page 256.