AudioCodes Mediant 2000 System - Configuring the General Security Settings

SIP User's Manual 206 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
5.9.5 Configuring the General Security Settings
The 'General Security Settings' screen is used to configure various security features.
¾ To configure the general security parameters, take these 4 steps:
1. Open the 'General Security Settings' screen (Advanced Configuration menu >
Security Settings > General Security Settings option).
2. Configure the General Security Settings according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to 'Saving Configuration' on page 256.