Version 5.2 165 September 2007
SIP User's Manual 5. Web-based Management
Table 5-31: Network Settings -- VLAN Settings Parameters
Parameter Description
IP Settings
Native VLAN ID
[VLANNativeVlanID]
Sets the native VLAN identifier (PVID, Port VLAN
ID).
The valid range is 1 to 4094. The default value is 1.
OAM VLAN ID
[VLANOamVlanID]
Sets the OAM (Operation, Administration and
Management) VLAN identifier. The valid range is 1 to
4094. The default value is 1.
Control VLAN ID
[VLANControlVlanID]
Sets the control VLAN identifier.
The valid range is 1 to 4094. The default value is 2.
Media VLAN ID
[VLANMediaVlanID]
Sets the media VLAN identifier.
The valid range is 1 to 4094. The default value is 3.
Priority Settings
Network Priority
[VLANNetworkServiceClassPriority]
Sets the priority for Network service class content.
The valid range is 0 to 7. The default value is 7.
Media Premium Priority
[VLANPremiumServiceClassMediaPriority]
Sets the priority for the Premium service class
content and media traffic.
The valid range is 0 to 7. The default value is 6.
Control Premium Priority
[VLANPremiumServiceClassControlPriority]
Sets the priority for the Premium service class
content and control traffic.
The valid range is 0 to 7. The default value is 6.
Gold Priority
[VLANGoldServiceClassPriority]
Sets the priority for the Gold service class content.
The valid range is 0 to 7. The default value is 4.
Bronze Priority
[VLANBronzeServiceClassPriority]
Sets the priority for the Bronze service class content.
The valid range is 0 to 7. The default value is 2.
To Next Page
Loading...