SIP User's Manual 188 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 5-37: E1/T1/J1 Configuration Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
interface groups to indicate that the reversed format of the DLCI field
must be used.
Note: When using the ini file to configure the gateway to support several
ISDNOutCallsBehavior features, add the individual feature values. For
example, to support both [2] and [16] features, set
ISDNOutCallsBehavior = 18 (i.e., 2 + 16).
Incoming Calls Behavior
[ISDNInCallsBehavior]
This is the bit-field used to determine several behavior options that
influence how the ISDN Stack INCOMING calls behave. To select the
options, click the arrow button, and then for each required option, select
1 to enable. The default is 0 (i.e., disable).
 [32] DATA CONN RS = Sends a CONNECT (answer) message on
NOT incoming Tel calls.
 [64] VOICE CONN RS = gateway sends a CONNECT (answer)
message on incoming Tel calls.
 [2048] CHAN ID IN FIRST RS = Sends Channel ID in the first
response to an incoming Q.931 Call Setup message. Otherwise, the
Channel ID is sent only if the gateway requires changing the
proposed Channel ID (default).
 [8192] CHAN ID IN CALL PROC = Sends Channel ID in a Q.931 Call
Proceeding message.
 [65536] PROGR IND IN SETUP ACK = Includes Progress Indicator
(PI=8) in Setup ACK message if an empty called number is received
in an incoming Setup message. Applicable to overlap dialing mode.
The parameter also directs the gateway to play a dial tone (for
TimeForDialTone), until the next called number digits are received.
 [262144] = NI-2 second redirect number. You can select and use (in
INVITE messages) the NI-2 second redirect number if two redirect
numbers are received in Q.931 Setup for incoming Tel-to-IP calls.
Note: When using the ini file to configure the gateway to support several
ISDNInCallsBehavior features, add the individual feature values. For
example, to support both [2048] and [65536] features, set
ISDNInCallsBehavior = 67584 (i.e., 2048 + 65536).
To Next Page
Loading...
Need help?
General