AudioCodes Mediant 2000 System User Manual

SIP User's Manual 208 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 5-41: General Security Settings Parameters
Parameter Description
RADIUS Authentication
Server Port
[RADIUSAuthPort]
Port number of the RADIUS authentication server.
The default value is 1645.
RADIUS Shared Secret
[SharedSecret]
'Secret' used to authenticate the gateway to the RADIUS server.
Should be a cryptographically strong password.
RADIUS Authentication Settings
Default Access Level
[DefaultAccessLevel]
Defines the default access level for the gateway when the RADIUS
(authentication) response doesn't include an access level attribute.
The valid range is 0 to 255. The default value is 200 (Security
Administrator').
Local RADIUS Password
Cache Mode
[RadiusLocalCacheMode]
Defines the gateway's mode of operation regarding the timer
(configured by the parameter RadiusLocalCacheTimeout) that
determines the validity of the username and password (verified by the
RADIUS server).
 [0] Absolute Expiry Timer = when you access a Web screen, the
timeout doesn't reset but rather continues decreasing.
 [1] Reset Timer Upon Access = upon each access to a Web
screen, the timeout always resets (reverts to the initial value
configured by RadiusLocalCacheTimeout).
Local RADIUS Password
Cache Timeout
[RadiusLocalCacheTimeout]
Defines the time (in seconds) the locally stored username and
password (verified by the RADIUS server) are valid. When this time
expires, the username and password becomes invalid and a must re-
verified with the RADIUS server.
The valid range is 1 to 0xFFFFFF. The default value is 300 (5
minutes).
 [-1] = Never expires.
 [0] = Each request requires RADIUS authentication.
RADIUS VSA Vendor ID
[RadiusVSAVendorID]
Defines the vendor ID the gateway accepts when parsing a RADIUS
response packet.
The valid range is 0 to 0xFFFFFFFF. The default value is 5003.
RADIUS VSA Access Level
Attribute
[RadiusVSAAccessAttribute
]
Defines the code that indicates the access level attribute in the
Vendor Specific Attributes (VSA) section of the received RADIUS
packet.
The valid range is 0 to 255. The default value is 35.
EtherDiscover Settings
EtherDiscover Operation
Mode
N/A.
SRTP Settings
Enable Media Security
[EnableMediaSecurity]
Enables or disables the Secure Real-Time Transport Protocol
(SRTP).
 [0] Disable = SRTP is disabled (default).
 [1] Enable = SRTP is enabled.

AudioCodes Mediant 2000 System Specifications

General

Brand	AudioCodes
Model	Mediant 2000 System
Category	VoIP
Language	English