AudioCodes Mediant 2000 System User Manual

SIP User's Manual 278 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 6-1: Networking Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
VLANBronzeServiceClas
sPriority
For a description of this parameter, refer to 'Configuring the VLAN
Settings' on page 164.
EnableDNSasOAM
This parameter applies to both Multiple IPs and VLAN mechanisms.
Multiple IPs: Determines the network type for DNS services.
VLAN: Determines the traffic type for DNS services.
 [1] = OAM (default)
 [0] = Control.
EnableNTPasOAM
This parameter applies to both Multiple IPs and VLAN mechanisms.
Multiple IPs: Determines the network type for NTP services.
VLAN: Determines the traffic type for NTP services.
 [1] = OAM (default)
 [0] = Control.
VLANSendNonTaggedOn
Native
Specify whether to send non-tagged packets on the native VLAN.
 [0] = Sends priority tag packets (default).
 [1] = Sends regular packets (with no VLAN tag).
Multiple IPs Parameters
EnableMultipleIPs
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
LocalMediaIPAddress
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
LocalMediaSubnetMask
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
LocalMediaDefaultGW
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
LocalControlIPAddress
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
LocalControlSubnetMask
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
LocalControlDefaultGW
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
LocalOAMIPAddress
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
LocalOAMSubnetMask
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
LocalOAMDefaultGW
For a description of this parameter, refer to 'Configuring the IP Settings'
on page 153.
PPPoE Parameters
EnablePPPoE
Enables the PPPoE (Point-to-Point Protocol over Ethernet) feature.
 [0] = Disable (default)
 [1] = Enable

AudioCodes Mediant 2000 System Specifications

General

Brand	AudioCodes
Model	Mediant 2000 System
Category	VoIP
Language	English