SIP User's Manual 292 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 6-5: RADIUS Parameter
ini File Field Name
Web Parameter Name
Valid Range and Description
MaxRADIUSSessions
Number of concurrent calls that can communicate with the RADIUS
server (optional).
The valid range is 0 to 240. The default value is 240.
SharedSecret
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 206.
RADIUSRetransmission
Number of retransmission retries.
The valid range is 1 to 10. The default value is 3.
RadiusTO
Determines the time interval (measured in seconds) the gateway waits
for a response before a RADIUS retransmission is issued.
The valid range is 1 to 30. The default value is 10.
RADIUSAuthServerIP
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 206.
RADIUSAuthPort
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 206.
RADIUSAccServerIP
For a description of this parameter, refer to 'Configuring RADIUS
Accounting Parameters' on page 147.
RADIUSAccPort
For a description of this parameter, refer to 'Configuring RADIUS
Accounting Parameters' on page 147.
RadiusAccountingType
For a description of this parameter, refer to 'Configuring RADIUS
Accounting Parameters' on page 147.
DefaultAccessLevel
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 206.
RadiusLocalCacheMode
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 206.
RadiusLocalCacheTimeo
ut
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 206.
RadiusVSAVendorID
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 206.
RadiusVSAAccessAttribu
te
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 206.
To Next Page
Loading...
Need help?
General