AudioCodes Mediant 2000 System User Manual

SIP User's Manual 300 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 6-7: SIP Configuration Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
SIPPSessionExpires
For a description of this parameter, refer to 'General Parameters' on
page 72.
SessionExpiresMethod
For a description of this parameter, refer to 'General Parameters' on
page 72.
MINSE
For a description of this parameter, refer to 'General Parameters' on
page 72.
SIPMaxRtx
For a description of this parameter, refer to 'General Parameters' on
page 72.
SipT1Rtx
For a description of this parameter, refer to 'General Parameters' on
page 72.
SipT2Rtx
For a description of this parameter, refer to 'General Parameters' on
page 72.
EnableEarlyMedia
For a description of this parameter, refer to 'General Parameters' on
page 72.
EnableTransfer
For a description of this parameter, refer to 'Supplementary Services' on
page 109.
XferPrefix
For a description of this parameter, refer to 'Supplementary Services' on
page 109.
EnableHold
For a description of this parameter, refer to 'Supplementary Services' on
page 109.
EnableForward
For a description of this parameter, refer to 'Supplementary Services' on
page 109.
EnableCallWaiting
For a description of this parameter, refer to 'Supplementary Services' on
page 109.
Send180ForCallWaiting
 [0] = Use 182 Queued response to indicate a call waiting (default).
 [1] = Use 180 Ringing response to indicate a call waiting.
HookFlashCode
For a description of this parameter, refer to 'Supplementary Services' on
page 109.
UseSIPURIForDiversionHe
ader
Sets the URI format in the Diversion header.
 [0] = 'tel:' (default).
 [1] = 'sip:'.
RTPOnlyMode
For a description of this parameter, refer to 'General Parameters' on
page 103.
TimeoutBetween100And1
8x
Defines the timeout (in msec) between receiving a 100 Trying response
and a subsequent 18x response. If a 18x response is not received
before this timer expires, the call is disconnected.
The valid range is 0 to 32,000. The default value is 0 (i.e., no timeout).
TransparentCoderPresent
ation
Determines the format of Transparent coder representation in the SDP.
Valid options include:
 [0] = clearmode (default)
 [1] = X-CCD

AudioCodes Mediant 2000 System Specifications

General

Brand	AudioCodes
Model	Mediant 2000 System
Category	VoIP
Language	English