AudioCodes Mediant 2000 System User Manual

SIP User's Manual 302 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 6-7: SIP Configuration Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
EnableImmediateTrying
Determines if and when the gateway sends a 100 Trying response to an
incoming INVITE request.
 [0] = 100 Trying response is sent upon receipt of PROCEEDING
message from the PSTN.
 [1] = 100 Trying response is sent immediately upon receipt of
INVITE request (default).
EnableReasonHeader
For a description of this parameter, refer to 'General Parameters' on
page 72.
3xxBehavior
For a description of this parameter, refer to 'General Parameters' on
page 72.
EnablePChargingVector
For a description of this parameter, refer to 'General Parameters' on
page 72.
EnableVMURI
For a description of this parameter, refer to 'General Parameters' on
page 72.
MaxActiveCalls
For a description of this parameter, refer to 'General Parameters' on
page 103.
MaxCallDuration
For a description of this parameter, refer to 'General Parameters' on
page 103.
EnableBusyOut
For a description of this parameter, refer to 'General Parameters' on
page 103.
EnableDigitDelivery2IP
For a description of this parameter, refer to 'General Parameters' on
page 103.
EnableDigitDelivery
For a description of this parameter, refer to 'General Parameters' on
page 103.
SITDetectorEnable
Enables or disables Special Information Tone (SIT) detection according
to the ITU-T recommendation E.180/Q.35.
 [0] = Disable (default).
 [1] = Enable.
AMDDetectionSensitivity
Determines the Answer Machine Detector (AMD) detection sensitivity.
The range is 0 to 7, where 0 is the best detection of an answering
machine and 7 is the best detection of a live call. The default is 3.
AMDTimeout
Timeout (in msec) between receiving CONNECT messages from the
ISDN and sending of Answering Machine Detection (AMD) results.
The valid range is 1 to 30,000. The default is 2,000 (2 seconds).
EnableSAS
For a description of this parameter, refer to 'Stand-Alone Survivability'
on page 111.
SASLocalSIPUDPPort
For a description of this parameter, refer to 'Stand-Alone Survivability'
on page 111.
SASDefaultGatewayIP
For a description of this parameter, refer to 'Stand-Alone Survivability'
on page 111.

AudioCodes Mediant 2000 System Specifications

General

Brand	AudioCodes
Model	Mediant 2000 System
Category	VoIP
Language	English