SIP User's Manual 308 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 6-10: PSTN Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
ProtocolType
For a description of this parameter, refer to 'Trunk Settings' on page 178.
ProtocolType_x
Same as the description for parameter ProtocolType, but for a specific
trunk ID (x = 0 - 7).
TraceLevel
For a description of this parameter, refer to 'Trunk Settings' on page 178.
FramingMethod
For a description of this parameter, refer to 'Trunk Settings' on page 178.
FramingMethod_x
Same as the description for parameter FramingMethod, but for a specific
trunk ID (x = 0 - 7).
TerminationSide
For a description of this parameter, refer to 'Trunk Settings' on page 178.
TerminationSide_x
Same as the description for parameter TerminationSide, but for a
specific trunk ID (x = 0 - 7).
ClockMaster
For a description of this parameter, refer to 'Trunk Settings' on page 178.
ClockMaster_x
Same as the description for parameter ClockMaster, but for a specific
trunk ID (x = 0 - 7).
TDMBusClockSource
For a description of this parameter, refer to 'Configuring the TDM Bus
Settings' on page 195.
TDMBusPSTNAutoClock
Enable
For a description of this parameter, refer to 'Configuring the TDM Bus
Settings' on page 195.
TDMBusLocalReference
For a description of this parameter, refer to 'Configuring the TDM Bus
Settings' on page 195.
AutoClockTrunkPriority
For a description of this parameter, refer to 'Trunk Settings' on page 178.
TDMBusPSTNAutoClock
RevertingEnable
For a description of this parameter, refer to 'Configuring the TDM Bus
Settings' on page 195.
LineCode
For a description of this parameter, refer to 'Trunk Settings' on page 178.
LineCode_x
Same as the description for parameter LineCode, but for a specific trunk
ID (x = 0 - 7).
EnableCallingPartyCateg
ory
For a description of this parameter, refer to 'Configuring the Digital
Gateway Parameters' on page 142.
BChannelNegotiation
For a description of this parameter, refer to 'Configuring the Digital
Gateway Parameters' on page 142.
NFASGroupNumber_x
For a description of this parameter, refer to 'Trunk Settings' on page 178.
DChConfig_x
For a description of this parameter, refer to 'Trunk Settings' on page 178.
ISDNNFASInterfaceID_x
For a description of this parameter, refer to 'Trunk Settings' on page 178.
CASTableIndex_x
For a description of this parameter, refer to 'Trunk Settings' on page 178.
CASFileName_0
CASFileName_1
CASFileName_7
CAS file name (e.g., 'E_M_WinkTable.dat') that defines the CAS
protocol. It is possible to define up to eight different CAS files by
repeating this parameter. Each CAS file can be associated with one or
more of the gateway trunks using the parameter CASTableIndex_x.
To Next Page
Loading...
Need help?
General