SIP User's Manual 322 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 6-12: Number Manipulation and Routing Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
 For available notations that represent multiple numbers, refer to
'Dialing Plan Notation' on page 116.
RemovePrefix
For a description of this parameter, refer to 'General Parameters' on
page 120.
RouteModeIP2Tel
For a description of this parameter, refer to 'IP to Trunk Group Routing'
on page 126.
RouteModeTel2IP
For a description of this parameter, refer to 'Tel to IP Routing Table' on
page 122.
SwapRedirectNumber
For a description of this parameter, refer to 'Configuring the Digital
Gateway Parameters' on page 142.
Prefix2RedirectNumber
For a description of this parameter, refer to 'Configuring the Digital
Gateway Parameters' on page 142.
AddTON2RPI
For a description of this parameter, refer to 'General Parameters' on
page 72.
NumberMapTel2IP
Manipulates the destination number for Tel-to-IP calls (also configured
in the Embedded Web Server's 'Destination Phone Number
Manipulation Table for TelÆIP Calls'screen -- refer to 'Configuring the
Number Manipulation Tables' on page 113).
Format of this ini file parameter table:
[NumberMapTel2Ip]
FORMAT NumberMapTel2Ip_Index =
NumberMapTel2Ip_DestinationPrefix,
NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress,
NumberMapTel2Ip_NumberType, NumberMapTel2Ip_NumberPlan,
NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight, NumberMapTel2Ip_Prefix2Add,
NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted;
[\NumberMapTel2Ip]
Where,
 DestinationPrefix = Destination number prefix
 SourcePrefix = Source number prefix
 SourceAddress = N/A
 NumberType = Number Type used in RPID header
 NumberPlan = Number Type used in RPID header
 RemoveFromLeft = Number of stripped digits from the left
 RemoveFromRight = Number of stripped digits from the right
 LeaveFromRight = Number of remaining digits from the right
 Prefix2Add = String to add as prefix
 Suffix2Add = String to add as suffix
 IsPresentationRestricted = N/A (set to $$)
For example: