Version 5.2 379 September 2007
SIP User's Manual 8. Networking Capabilities
b. Use the ‘Add a new table entry’ pane to add the routing rules shown in the
following table:
Destination IP
Address
Destination Mask
Gateway IP
Address
Hop Count Network Type
130.33.4.6 255.255.255.255 10.32.0.1 20 Control
83.4.87.6 255.255.255.0 10.31.0.1 20 OAM
a. Click the Submit button to save your changes.
6. Save your changes to flash memory (refer to 'Saving Configuration' on page 256).
7. Reset the gateway (refer to 'Resetting the Gateway' on page 257).
To Next Page
Loading...
Need help?
General