To configure a conference call while on an active call with more than one other
caller:
1. Press the Up/Down navigation key to highlight one
of the calls,
Join 2. Press the Join context-sensitive soft key and select
Conference
from the menu.
The calls are joined together as a conference call on
the call server.
When you receive a new call while on a conference call, you can answer, ignore, decline, or
forward the call as you would any call. You can also initiate a new call while on a conference
call in the normal way and return to the conference call after you complete the call. The
conference call continues while you are on the other call.
Note:
If you press the Goodbye key or select Release from the Action menu while on the
conference call
you leave the conference call. The conference call continues with the other
callers.
To join a call to an existing conference call:
1. Press the Up/Down navigation key to highlight the
call you want to join to the conference.
Join 2. Press the Join context-sensitive soft
key to join the
highlighted call to the conference.
Ad hoc conferencing when connecting to the Call Server
This feature allows you to make ad hoc conference calls when you connect to the Call
Server.
Note:
Your system
administrator must enable ad hoc conferencing before you connect to the Call
Server.
While on an active call
134 Avaya 1230 IP Deskphone with SIP Software User Guide November 2013
Comments? infodev@avaya.com
To Next Page
Loading...
