A Speed Dial key or one included in a Speed Dial List can cause a call that was placed on hold
(when invoked) to be un-held automatically (when call completes), based on a new value that
must be configured when a Speed Dial key is created or configured.
The following figure displays the feature key used by the Speed Dial List.
Figure 49: Main feature key screen
A feature key provisioned for use as a Speed Dial List has a similar appearance to all other
programmed feature
keys on the idle screen (or in-call screen). The label used for the selected
key is provided through provisioning.
The following is the icon for the Speed Dial List key.
After you press the feature key provisioned as a Speed Dial List, the list of Speed Dial entries
configured appears on the screen and the you can select an item from that list to invoke a
Speed Dial.
If the Speed Dial List is empty, or results in being empty due to context-sensitive hiding of
contents, an error message displays stating Not Available.
Related topics:
Speed Dial List screen on page 219
Auto-Retrieve flag on page 220
Speed Dial List screen
You can select the provisioned Speed Dial List entries from the Speed Dial List screen. The
following figure is an example of the Speed Dial List screen with the list entries.
Speed Dial List
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 219
To Next Page
Loading...
