Avaya 1230 - Chapter 5: Installing the 1230 IP Deskphone; Before You Begin; Connecting the Components

Chapter 5: Installing the
1230 IP Deskphone
This chapter describes how to install and connect your 1230 IP Deskphone.
Before you begin
Caution:
Do not plug your IP Deskphone into a regular telephone jack. This can result in severe
damage to
the IP Deskphone. Consult your system administrator to ensure that you plug
your telephone into a 10/100/1000 BaseT Ethernet jack.
Caution:
Your IP Deskphone is designed for use in an indoor environment only.
Caution:
Do not plug your Avaya 1230 IP Deskphone into an Integrated Service Digital Network
(ISDN) connection. Severe damage to the Avaya 1230 IP Deskphone can result.
Connecting the components
Install your IP Deskphone by completing the following procedures in the order listed:
• Attaching the foot stand (optional) on page 50
• Connecting the AC power adapter (optional) on page 51
• Connecting the handset on page 51
• Connecting the headset (optional) on page 51
• Connecting the LAN ethernet cable on page 52
• Connecting the PC Ethernet cable on page 52
• Wall-mounting the IP Deskphone (optional) on page 53
The following figure shows the connections on the IP Deskphone.
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 49