Automatic login
If the
automatic login feature is enabled and you were logged in when the IP Deskphone was
switched off, the IP Deskphone automatically logs you back in upon startup. If multiple users
were logged in, then they are all logged back in one after the other.
If the automatic login feature is disabled, then the automatic login does not occur.
It is possible to provision the IP Deskphone with user credentials for automatic login even on
the initial startup. With the addition of multiuser support, it is also possible to provision multiple
accounts in the same way. For more information about different autologin scenarios, see
Primary account logout on page 181.
Logging out
The logout command prompts you to select an account, asks for confirmation, then proceeds
to log out the account. Logging out an account frees the corresponding Line key. Logging out
does not require a password.
For more information about logging out, see Logging off from the IP Deskphone on page 44
The following figure shows the logout screens.
Figure 36: Logout screens
Related topics:
Primary account logout on page 181
Secondary account logout on page 182
Primary account logout
Logging out
of the primary account causes all other accounts to log out automatically and the
IP Deskphone to display the login screen. The secondary accounts are logged back in
Logging out
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 181
To Next Page
Loading...
