Avaya 1230 - Feature Key Autoprogramming

Edit
2. To select a feature key to remove, do one of the
following:
• Press the Up/Down
navigation key to scroll through
the feature keys to highlight one to remove and press
the Edit context-sensitive soft key.
• Press the feature key that you want to remove and
then press the Edit context-sensitive soft key.
• Use the dialpad to select the Feature key that you
want to view and then press the Edit context-
sensitive soft key.
The Program Key screen opens as shown in
Figure
30: Edit feature key screen on page 152
Back
Remove
3. Choose one of the following:
• Press the
Back context-sensitive soft key to return
to the previous screen.
• Press the Remove context-sensitive soft.
The IP Deskphone displays Confirm Remove
key?
Yes
No
4. Choose one of the following:
• Press the
Yes context-sensitive soft key to confirm
the removal of the feature key.
• Press the No context-sensitive soft key to return to
the previous screen without removing the feature
key.
Feature key autoprogramming
The feature
key autoprogramming provides the user with the ability to cause the IP Deskphone
to detect all unused programmable keys, and to automatically fill them as Speed Dial keys,
Send IM keys, or Call Forwarding keys using the user Friends list or the user Address Book.
The feature key autoprogramming also provides the user with the ability to remove all
programmed feature keys from the IP Deskphone.
Autoprogramming does not overwrite feature keys already programmed and when the IP
Deskphone detects if a feature key is already configured with Speed Dial, Send IM, or Call
Forward for contact, it does not create a new instance.
Note:
The autoprogramming feature options are dependent on your service provider and IP
Deskphone configuration. If you attempt to use the autoprogram feature (Bulk context-
Feature keys
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 159