Avaya 1230 - Configuring Do Not Disturb

2. Using the dial pad, enter the telephone number or
SIP address where you want to forward your calls.
Forwrd
Clear
Back
3. Choose one of the following:
• Press the Forwrd
soft key to accept the number and
return to the Services Menu.
• Press the Clear soft key to clear the input line.
• Press the Back soft key to cancel the input and return
to the Services menu.
Deactivate Call Forward
To deactivate Call Forward:
Disable
Back
Choose one of the following:
• Press the Disable
soft key to deactivate Call Forward
and return to the Services Menu.
• Press the Back soft key to cancel deactivating the
Call Forward and return to the Services menu.
Configuring Do Not Disturb
Use Do Not Disturb to automatically block all incoming calls. When you activate this feature,
the calling party receives a busy signal.
To enable Do Not Disturb:
DND
1. Press the DND context-sensitive soft
key on the idle
display (press the More… context-sensitive soft key
until DND appears).
Enable
Back
2. Choose one of the following:
• Press the
Enable context-sensitive soft key to
configure the IP Deskphone to Do Not Disturb.
• Press the Back context-sensitive soft key to return to
the previous menu.
Ok 3. Press the Ok context-sensitive soft key to return to
the Services menu.
Additional features
166 Avaya 1230 IP Deskphone with SIP Software User Guide November 2013
Comments? infodev@avaya.com