Avaya 1230 - Automatic Login; Configuring the Domain

• Selecting a language on page 38
• Logging on to your Avaya 1230 IP Deskphone on page 38
• Configuring the duration of the login on page 40
• Selecting a location on page 42
• User Profile on page 43
• Overwriting your personal Address Book on page 43
Note:
The system automatically logs you back on after a power outage or software upgrade. The
system administrator configures this feature on a network-wide basis.
Automatic login
Before you first receive your Avaya 1230 IP Deskphone, your system administrator can
configure your
IP Deskphone with your user logon and password. If this is the case, after you
plug in the IP Deskphone you can use it without further configuration.
Note:
If the
IP Deskphone is configured with automatic logon, you can not use the log off function,
and you need a password to access some features and functions. Contact your system
administrator or service provider for further information.
Configuring the domain
Before the log on process, if you need to change the domain or confirm that the domain you
log on to is correct, press the Domain soft key from the logon prompt. The current domain
appears
on the 1230 IP Deskphone LCD screen. You can edit the domain that is listed or press
the Domain soft key to access a list of available domains to which you can choose to
connect.
Note:
• You must enter the admin password to edit domains.
•
Check with your system administrator before editing or changing domains.
To change the domain:
Domain
1. Press the Domain soft key to change the current
domain.
Accessing the Avaya 1230 IP Deskphone
36 Avaya 1230 IP Deskphone with SIP Software User Guide November 2013
Comments? infodev@avaya.com