Avaya 1230 - Configuring a Presence State

To disable Do Not Disturb:
Disable
Back
1. Choose one of the following:
• Press the
Disable context-sensitive soft key to
configure Do Not Disturb.
• Press the Back context-sensitive soft key to
return to the previous menu.
2.
Ok
2. Press the Ok context-sensitive soft key to return to
the Services menu.
Configuring a Presence state
You can configure a presence state to enable other users to see information about your
availability. You can select from a list of pre-made messages or create a new message to
display for your presence state.
To configure a Presence state:
Presnce
1. Press the Presnce context-sensitive soft
key (press
the More… context-sensitive soft until Presnce
appears).
Change
Back
2. Choose one of the following:
• Press the
Change context-sensitive soft key to
change your current Presence state.
• Press the Back context-sensitive soft key to return to
the Services menu.
3. Press the Up/Down navigation key to highlight
either:
• Connected
•
Unavailable
Select 4. Choose one of the following:
Configuring a Presence state
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 167