3. Use the dial pad to enter a key label.
Next 4. Press the Next soft key to continue.
5. Select a User.
Select 6. Press the Select soft key.
7. Use the dial pad to enter the address.
Finish
Clear
Back
8. Choose one of the following:
• Press the
Finish soft key to confirm the entry and
complete the procedure.
• Press the Clear soft key to erase the entry.
• Press the Back soft key to return to the previous
menu.
To program a Do Not Disturb feature key:
To program a Do Not Disturb feature key, beginning from Step 6 in the procedure “To modify
a feature key”:
Select
1. Press the Select soft key.
2. Select Do not disturb.
Select 3. Press the Select soft key.
Feature keys
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 155
To Next Page
Loading...
