Avaya 1230 - Page 163

• a highlighted entry in an Address Book list
• a highlighted entry in your Call Inbox
To designate a feature key by using the Copy key:
1. Open your Address Book or Call Inbox,, highlight the
entry you want to use for the feature key, and then
press the Copy key.
2. Press the Up/Down navigation key to highlight
Speed Dial, Call Forward, or Send IM from the menu.
Note:
Presence and Do Not Disturb are not programmable
by using the Copy key.
Select 3. Press the Select context-sensitive soft key.
Set
4. Choose one of the following:
• Press the
Up/Down navigation key to highlight the
feature key to which to copy the information to and
press Set.
• Press the Feature key that you want to use for the
service selected.
5. Use the dialpad to enter the label for the feature
key.
Next
Back
6. Press the Next soft
key to continue. Continue to input
information based on the selected service:
• Speed Dial — see
To program a Speed Dial feature
key: on page 153
•
Call Forward — see
To program a Call Forward
feature key: on page 154
Feature keys
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013
163