Press Select to select the currently highlighted setting.
Press Back to exit the Screensaver Mode menu.
Note:
Some options may not appear, depending on configuration.
Disable:
Disabling the Screensaver displays a message confirming your selection.
The following figure displays the Screensaver Disabled message screen.
Figure 45: Screensaver Disabled message
Enable (no password):
Enabling the screensaver in no password mode displays a message confirming your
selection.
The following figure displays the Screensaver Enabled (no password) message screen.
Figure 46: Screensaver enabled message
Note:
If the device configuration does not allow the use of a password-free screensaver, this menu
option is not available to you.
Enable (with password):
Screensaver/screen lock
Avaya 1230 IP Deskphone with SIP Software User Guide November 2013 209